John Deere Z950M 60" Z Trak Zero Turn Mower

ZTrak™ Zero-Turn Mower

• 7-Iron™ PRO Mowing Deck
• Propane Option Available
• Gasoline Engine
• Rear Discharge Deck

• Engine Manufacturer/model: FX850V
• Engine Power: Gross at 3,600 rpm: 27 hp / 20.1 kW
• Fuel tank capacity: 11.5 U.S. gal. / 43.5 L
• Mower deck Size: 60, 72 in. / 152, 183 cm
• Blade tip speed: Approximately 18,000 fpm / 4,486 m/min
• Transmission: Hydrostatic
• Speed range: 0-10 mph / 0-16.1 km/h
• Drive wheels: 24x12-12
• Caster wheels: 13x6.5-6
• Warranty: 36 months or 1200 hours, whichever comes first / First 24 months, no hour limitation

• Manufacturer/Model: FX850V
• Power: Gross at 3,600 rpm: 27 hp / 20.1 kW
• Displacement: 52 cu in. / 852 cc
• Cylinders: Two
• Crankcase capacity: With filter, 2 U.S. qt / 1.9 L
• Oil filter: Full flow, replaceable
• Lubrication: Full pressure
• Cooling: Air
• Air cleaner: Pre-cleaner / Yes / Heavy-duty canister type with safety element

• Fuel type: Gasoline
• Fuel consumption: Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr / 4.2-7.2 L/hr
• Fuel tank capacity: 11.5 U.S. gal. / 43.5 L
• Fuel tank switch/shut-off valve: Yes

• Charge system: 20 amp
• Battery voltage: 12 V
• Cold cranking amp: 300 amp
• Hour meter: Standard, digital
• Operator presence starting system: Brake-N-Go (hand)

• Transmission: Hydrostatic
• Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor
• Travel speed: Speed range / 0-10 mph / 0-16.1 km/h / Forward / 0-10 mph / 0-16.1 km/h / Reverse / 0-4.5 mph / 0-7.2 km/h
• Speed and direction control: Twin levers
• Hydraulic capacity: 5.9 U.S. qt / 5.6 L
• Filter: Internal, replaceable

• Warranty: 36 months or 1200 hours, whichever comes first / First 24 months, no hour limitation

• Drive wheels: 24x12-12
• Load rating: 4 PR

• Dynamic braking: Twin levers
• Park brake: Internal wet disk integrated in the transmission
• Park brake actuation: Hand brake

• Type: Electro-magnetic, 225 lb.-ft / 305 Nm
• Drive: V-belt

• Size: 60, 72 in. / 152, 183 cm
• Deck construction: 7-Iron PRO, one-piece stamped steel with reinforcements
• Deck thickness: 7 gauge / 0.18 in. / 4.6 mm
• Discharge: Side, MOD
• Height-of-cut range: Increments / 0.25 in. / 0.64 cm / 1-5.5 in. / 2.54-14 cm
• Cutting width: 60, 72 in. / 152, 183 cm

• Length: Varies by deck size
• Thickness: 0.25 in. / 0.64 cm
• Blade tip speed: Approximately 18,000 fpm / 5,486 m/min
• Number: Three

• Caster wheel type: Flat free
• Caster wheels: 13x6.5-6
• Front anti-scalp rollers: RH, center, LH
• Rear anti-scalp rollers: Optional

• Length: 84 in. / 213 cm
• Width: With chute down, 74, 86 in. / 188, 218 cm
• Height: With ROPS up, 73 in. / 185 cm / With ROPS down, 47 in. / 119 cm
• Weight: 1,275 to1,365 lb. / 578 to 619 kg